Data from manufacturer datasheets and product pages; median over the models of this category in the database.
SRA166L
The SRA166L combines a high 166 kg payload with an extended arm of 2951 mm reach, as the L suffix suggests. This six-axis Nachi resistance-welding robot carries bulky, heavy guns with an integrated transformer, and the extra extension lets it reach deeper into the structure of the joined part.
System components per manufacturer
Schematic drawing. You can click the assemblies for which this model has documented data (manufacturer data and published teardowns); greyed-out parts are not documented.
-
- Application wires and tubes inside the arm
Source: nachirobotics.com - Balance unit inside the arm
Source: nachirobotics.com - ISO flange adaptor (option) · OP-W2-001
Source: nachirobotics.com - Flange adaptor P.C.D.92 for 166 kg payload (option) · OP-W3-001
Source: nachirobotics.com - Encoder connector protector for axis 3 (option) · OP-P6-005
Source: nachirobotics.com
- Application wires and tubes inside the arm
-
- FD controller
Source: nachirobotics.com
- FD controller
-
- Big capacity BJ3 wiring junction box (option) · OP-E5-003
Source: nachirobotics.com - Fork bracket for floor mounting type (option) · OP-S2-033
Source: nachirobotics.com - Zeroing pin and block for 166 kg payload (option) · OP-T2-053
Source: nachirobotics.com - Motion range limit switch for axes 1, 2 and 3 (option)
Source: nachirobotics.com - Adjustable mechanical stopper (option)
Source: nachirobotics.com - Bypass cable (option) · BCUNIT20-30
Source: nachirobotics.com - Scale seal for wrist three axes (option) · OP-N2-020
Source: nachirobotics.com
- Big capacity BJ3 wiring junction box (option) · OP-E5-003
- 166kgPayload
- 980kgWeight
- 6DOFDegrees of freedom
- 2,951mmReach
Key facts
- Specificationspayload 166 kg · weight 980 kg · degrees of freedom 6 DOF
- Statuson sale
- Availability in Polandnot confirmed
Summary
- ManufacturerNACHI-FUJIKOSHI CORP. (Nachi Robotics)
- CategoryWelding robots
- Statuson sale
- Availability in PolandNo confirmed distributor in Poland
The SRA166L combines a high 166 kg payload with an extended arm of 2951 mm reach, as the L suffix suggests. This six-axis Nachi resistance-welding robot carries bulky, heavy guns with an integrated transformer, and the extra extension lets it reach deeper into the structure of the joined part.
Pairing high capacity with a long arm is advantageous for thick sheet stacks in large components – body sides, floors, frames and spacious welded assemblies that need both electrode force and a wide working area. A repeatability of 0.06 mm holds every spot at a precisely defined location, which is critical for the strength of load-bearing joints.
Welding runs without filler: current through the electrode-clamped sheets forms a nugget. The SRA166L is a machine for demanding applications where heavy tooling meets the need to serve extensive, hard-to-reach structures.
Specs
-
Weight980 kg+102% vs. the category median (485 kg, n=171)
-
Degrees of freedom6in line with the category median (6, n=224)
-
Payload166 kg+730% vs. the category median (20 kg, n=220)
-
Reach2,951 mm+44% vs. the category median (2,050 mm, n=228)
- category medianA higher value doesn't always mean a better robot; it depends on the application.
Dimensions and weight
- Weight
- 980 kg
- Reach
- 2,951 mm
Motion and manipulation
- Degrees of freedom
- 6
- Payload
- 166 kg
Additional specs
- Series
- SRA
- Welding type
- spot welding
- Welding processes
- spot welding
- Applications (per manufacturer)
- spot welding
- Robot controller
- FD
- Repeatability (± mm)
- 0.06
- Protection rating (IP)
- IP54
- Protection rating (wrist)
- IP67
- Mounting
- floor
- Axis J1 — motion range (°)
- ±180
- Axis J2 — motion range (°)
- -80 / +60
- Axis J4 — motion range (°)
- ±360
- Axis J5 — motion range (°)
- ±135
- Axis J6 — motion range (°)
- ±360
- Axis J1 — max. speed (°/s)
- 115
- Axis J2 — max. speed (°/s)
- 105
- Axis J3 — max. speed (°/s)
- 113
- Axis J4 — max. speed (°/s)
- 140
- Axis J5 — max. speed (°/s)
- 173
- Axis J6 — max. speed (°/s)
- 260
- Wrist J4 — allowable moment (N·m)
- 951
- Wrist J5 — allowable moment (N·m)
- 951
- Wrist J6 — allowable moment (N·m)
- 490
- Wrist J4 — allowable inertia (kg·m²)
- 88.9
- Wrist J5 — allowable inertia (kg·m²)
- 88.9
- Additional load on arm (kg)
- 45
- Operating temperature (°C)
- 0–45
- Max. humidity (%)
- 85
- Noise level (dB)
- 79.6
- Country of origin
- Japan
Price and availability in Poland
no data
Dealers in Poland
No confirmed distributor in Poland
Applications
We don't yet have documented applications for this model, and we don't list anything without a source.
Comparison
Robot comparison toolSimilar models
- on sale
- on sale
- on sale
- on sale
- on sale
- on sale
History
no data
Sources
Shop links may become affiliate links in future, details: How we make money · How we check