Data from manufacturer datasheets and product pages; median over the models of this category in the database.
SRA133L
The SRA133L is the long-arm version of a Nachi welding robot with a 133 kg payload; the L suffix indicates the extended 2951 mm reach.
System components per manufacturer
Schematic drawing. You can click the assemblies for which this model has documented data (manufacturer data and published teardowns); greyed-out parts are not documented.
-
- Application wires and tubes inside the arm
Source: nachirobotics.com - Balance unit inside the arm
Source: nachirobotics.com - ISO flange adaptor (option) · OP-W2-001
Source: nachirobotics.com - Flange adaptor P.C.D.92 for 166 kg payload (option) · OP-W3-001
Source: nachirobotics.com - Encoder connector protector for axis 3 (option) · OP-P6-005
Source: nachirobotics.com
- Application wires and tubes inside the arm
-
- FD controller
Source: nachirobotics.com
- FD controller
-
- Big capacity BJ3 wiring junction box (option) · OP-E5-003
Source: nachirobotics.com - Fork bracket for floor mounting type (option) · OP-S2-033
Source: nachirobotics.com - Zeroing pin and block for 166 kg payload (option) · OP-T2-053
Source: nachirobotics.com - Motion range limit switch for axes 1, 2 and 3 (option)
Source: nachirobotics.com - Adjustable mechanical stopper (option)
Source: nachirobotics.com - Bypass cable (option) · BCUNIT20-30
Source: nachirobotics.com - Scale seal for wrist three axes (option) · OP-N2-020
Source: nachirobotics.com
- Big capacity BJ3 wiring junction box (option) · OP-E5-003
- 133kgPayload
- 980kgWeight
- 6DOFDegrees of freedom
- 2,951mmReach
Key facts
- Specificationspayload 133 kg · weight 980 kg · degrees of freedom 6 DOF
- Statuson sale
- Availability in Polandnot confirmed
Summary
- ManufacturerNACHI-FUJIKOSHI CORP. (Nachi Robotics)
- CategoryWelding robots
- Statuson sale
- Availability in PolandNo confirmed distributor in Poland
The SRA133L is the long-arm version of a Nachi welding robot with a 133 kg payload; the L suffix indicates the extended 2951 mm reach. This capacity allows medium-heavy resistance-welding guns together with a transformer, while the greater extension widens the working area over the base version.
The long arm eases handling of large parts and access to weld points far from the robot base, useful on big body sub-assemblies, side panels and spacious sheet-metal structures. Resistance spot welding uses no filler: two electrodes press the joined sheets and pass current through them, and the released heat forms a nugget at the contact point that fuses the sheets.
A 133 kg payload is a sensible compromise between carrying substantial guns and keeping the arm agile. The SRA133L is a good choice where both longer reach and heavier tooling capacity are needed than the lighter models offer.
Specs
-
Weight980 kg+102% vs. the category median (485 kg, n=171)
-
Degrees of freedom6in line with the category median (6, n=224)
-
Payload133 kg+565% vs. the category median (20 kg, n=220)
-
Reach2,951 mm+44% vs. the category median (2,050 mm, n=228)
- category medianA higher value doesn't always mean a better robot; it depends on the application.
Dimensions and weight
- Weight
- 980 kg
- Reach
- 2,951 mm
Motion and manipulation
- Degrees of freedom
- 6
- Payload
- 133 kg
Additional specs
- Series
- SRA
- Welding type
- spot welding
- Repeatability (± mm)
- 0.06
- Protection rating (IP)
- IP54
- Protection rating (wrist)
- IP67
- Mounting
- floor
- Axis J1 — motion range (°)
- ±180
- Axis J2 — motion range (°)
- -80 / +60
- Axis J3 — motion range (°)
- -133.4 / +150
- Axis J4 — motion range (°)
- ±360
- Axis J5 — motion range (°)
- ±135
- Axis J6 — motion range (°)
- ±360
- Axis J1 — max. speed (°/s)
- 125
- Axis J2 — max. speed (°/s)
- 115
- Axis J3 — max. speed (°/s)
- 121
- Axis J4 — max. speed (°/s)
- 140
- Axis J5 — max. speed (°/s)
- 173
- Axis J6 — max. speed (°/s)
- 260
- Wrist J4 — allowable moment (N·m)
- 800
- Wrist J5 — allowable moment (N·m)
- 800
- Wrist J6 — allowable moment (N·m)
- 400
- Wrist J4 — allowable inertia (kg·m²)
- 76
- Wrist J5 — allowable inertia (kg·m²)
- 76
- Wrist J6 — allowable inertia (kg·m²)
- 38
- Additional load on arm (kg)
- 45
- Operating temperature (°C)
- 0–45
- Max. humidity (%)
- 85
- Noise level (dB)
- 79.6
- Country of origin
- Japan
Price and availability in Poland
no data
Dealers in Poland
No confirmed distributor in Poland
Applications
We don't yet have documented applications for this model, and we don't list anything without a source.
Comparison
Robot comparison toolSimilar models
- on sale
- on sale
- on sale
- on sale
- on sale
- on sale
History
no data
Sources
Shop links may become affiliate links in future, details: How we make money · How we check