Data from manufacturer datasheets and product pages; median over the models of this category in the database.
NB04L
The NB04L is a six-axis arc-welding robot from Nachi's NB series, built for GMAW/MIG-MAG and TIG seam welding. With a 4 kg payload and an extended 2008 mm reach – the L suffix marks the long arm – it guides the torch freely along long seams on large steel and aluminium workpieces.
System components per manufacturer
Schematic drawing. You can click the assemblies for which this model has documented data (manufacturer data and published teardowns); greyed-out parts are not documented.
-
- Through-arm coaxial cable design
Source: nachirobotics.com - Built-in cables in the manipulator for welding (wire feed motor/encoder)
Source: nachirobotics.com - Upper-arm mounting area for wire feeder and gas solenoid valve
Source: nachirobotics.com
- Through-arm coaxial cable design
-
- FD11-FL0 robot controller (for NB04L / NV06L)
Source: nachirobotics.com
- FD11-FL0 robot controller (for NB04L / NV06L)
-
- Teach pendant with touch panel, jog dial and enable switch
Source: nachirobotics.com - Operation box with e-stop, motor on, start, stop and mode select
Source: nachirobotics.com - Starting box with e-stop, start and stop (option) (option)
Source: nachirobotics.com
- Teach pendant with touch panel, jog dial and enable switch
-
- CAN I/F board for DR, DL and DP power sources · L20365A
Source: nachirobotics.com
- CAN I/F board for DR, DL and DP power sources · L20365A
-
- AF-4011 wire feeding unit
Source: nachirobotics.com
- AF-4011 wire feeding unit
-
- Air-cooled 350 A 45° curved torch
Source: nachirobotics.com - Water-cooled 500 A 45° curved torch
Source: nachirobotics.com - Shock sensor for manipulator, type B
Source: nachirobotics.com
- Air-cooled 350 A 45° curved torch
-
- IEC 61131-3 software PLC (optional) (option)
Source: nachirobotics.com
- IEC 61131-3 software PLC (optional) (option)
- 4kgPayload
- 277kgWeight
- 6DOFDegrees of freedom
- 2,008mmReach
Key facts
- Specificationspayload 4 kg · weight 277 kg · degrees of freedom 6 DOF
- Statuson sale
- Availability in Polandnot confirmed
Summary
- ManufacturerNACHI-FUJIKOSHI CORP. (Nachi Robotics)
- CategoryWelding robots
- Statuson sale
- Availability in PolandNo confirmed distributor in Poland
The NB04L is a six-axis arc-welding robot from Nachi's NB series, built for GMAW/MIG-MAG and TIG seam welding. With a 4 kg payload and an extended 2008 mm reach – the L suffix marks the long arm – it guides the torch freely along long seams on large steel and aluminium workpieces.
A positioning repeatability of 0.08 mm yields even, continuous beads, important in structural steel fabrication and for frames, tanks and sheet-metal assemblies. The IP65 rating suits the dusty welding cell with its spatter and fumes. Motion and welding parameters are coordinated by Nachi's FD11 controller, while the slim arm reaches awkward joint locations and the long reach limits repositioning of the part.
Specs
-
Weight277 kg−43% vs. the category median (485 kg, n=171)
-
Degrees of freedom6in line with the category median (6, n=224)
-
Payload4 kg−80% vs. the category median (20 kg, n=220)
-
Reach2,008 mmin line with the category median (2,050 mm, n=228)
- category medianA higher value doesn't always mean a better robot; it depends on the application.
Dimensions and weight
- Weight
- 277 kg
- Reach
- 2,008 mm
Motion and manipulation
- Degrees of freedom
- 6
- Payload
- 4 kg
Additional specs
- Series
- NB
- Welding type
- arc welding
- Welding processes
- MIG/MAG
- Applications (per manufacturer)
- arc welding
- Robot controller
- FD11
- Repeatability (± mm)
- 0.08
- Protection rating (IP)
- IP65
- Mounting
- floor, ceiling (inverted), wall
- Axis J1 — motion range (°)
- ±170
- Axis J2 — motion range (°)
- -155 / +100
- Axis J3 — motion range (°)
- -170 / +190
- Axis J4 — motion range (°)
- ±155
- Axis J5 — motion range (°)
- -45 / +225
- Axis J6 — motion range (°)
- ±205
- Axis J1 — max. speed (°/s)
- 195
- Axis J2 — max. speed (°/s)
- 200
- Axis J3 — max. speed (°/s)
- 200
- Axis J4 — max. speed (°/s)
- 420
- Axis J5 — max. speed (°/s)
- 420
- Axis J6 — max. speed (°/s)
- 600
- Wrist J4 — allowable moment (N·m)
- 10.1
- Wrist J5 — allowable moment (N·m)
- 10.1
- Wrist J6 — allowable moment (N·m)
- 2.94
- Wrist J4 — allowable inertia (kg·m²)
- 0.38
- Wrist J5 — allowable inertia (kg·m²)
- 0.38
- Wrist J6 — allowable inertia (kg·m²)
- 0.03
- Additional load on arm (kg)
- 20
- Power supply capacity (kVA)
- 2.4
- Operating temperature (°C)
- 0–45
- Max. humidity (%)
- 80
- Country of origin
- Japan
Price and availability in Poland
no data
Dealers in Poland
No confirmed distributor in Poland
Applications
We don't yet have documented applications for this model, and we don't list anything without a source.
Comparison
Robot comparison toolSimilar models
- on sale
- on sale
- on sale
- on sale
- on sale
- on sale
History
no data
Sources
Shop links may become affiliate links in future, details: How we make money · How we check