Data from manufacturer datasheets and product pages; median over the models of this category in the database.
SRA120EL
The SRA120EL stands out for its especially long arm – the EL (extra-long) designation corresponds to an impressive 3099 mm reach.
System components per manufacturer
Schematic drawing. You can click the assemblies for which this model has documented data (manufacturer data and published teardowns); greyed-out parts are not documented.
-
- Application wires and tubes inside the arm
Source: nachirobotics.com - Balance unit inside the arm (slim swivel base)
Source: nachirobotics.com - A-Trac4 cable support for spot welding (long arm on order) (option)
Source: nachirobotics.com - Adjustable mechanical stopper for axes 1, 2 and 3 (option)
Source: nachirobotics.com - Flange adaptor for 166 kg (P.C.D.92) (option) · OP-W3-001
Source: nachirobotics.com - ISO flange adaptor (option) · OP-W2-001
Source: nachirobotics.com - Gas balancer unit pressure gauge (analog) (option) · KP-ZJ-013
Source: nachirobotics.com
- Application wires and tubes inside the arm
-
- FD controller (basic operations manual TCFEN-002)
Source: nachirobotics.com
- FD controller (basic operations manual TCFEN-002)
-
- Big capacity BJ3 wiring junction box (option) · OP-E5-003
Source: nachirobotics.com - Bypass cable (option) · BCUNIT20-30
Source: nachirobotics.com
- Big capacity BJ3 wiring junction box (option) · OP-E5-003
- 120kgPayload
- 985kgWeight
- 6DOFDegrees of freedom
- 3,099mmReach
Key facts
- Specificationspayload 120 kg · weight 985 kg · degrees of freedom 6 DOF
- Statuson sale
- Availability in Polandnot confirmed
Summary
- ManufacturerNACHI-FUJIKOSHI CORP. (Nachi Robotics)
- CategoryWelding robots
- Statuson sale
- Availability in PolandNo confirmed distributor in Poland
The SRA120EL stands out for its especially long arm – the EL (extra-long) designation corresponds to an impressive 3099 mm reach. This six-axis Nachi resistance-welding robot carries the gun with its transformer at a 120 kg payload, enough for typical spot-welding guns while reaching far further than standard models.
The very long extension is meant for large parts and deeply set weld points, for example on big bodies, platforms and sprawling sheet-metal structures where the robot must reach locations far from its base. A repeatability of 0.06 mm ensures accurate placement of every spot despite the long arm. Resistance welding runs without filler – the electrodes press the sheets and pass current to form a nugget.
The SRA120EL is the choice for stations where maximum reach is the deciding criterion, at a moderate but sufficient tooling capacity.
Specs
-
Weight985 kg+103% vs. the category median (485 kg, n=171)
-
Degrees of freedom6in line with the category median (6, n=224)
-
Payload120 kg+500% vs. the category median (20 kg, n=220)
-
Reach3,099 mm+51% vs. the category median (2,050 mm, n=228)
- category medianA higher value doesn't always mean a better robot; it depends on the application.
Dimensions and weight
- Weight
- 985 kg
- Reach
- 3,099 mm
Motion and manipulation
- Degrees of freedom
- 6
- Payload
- 120 kg
Additional specs
- Series
- SRA
- Welding type
- spot welding
- Repeatability (± mm)
- 0.06
- Protection rating (IP)
- IP54
- Protection rating (wrist)
- IP67
- Mounting
- floor
- Axis J1 — motion range (°)
- ±180
- Axis J2 — motion range (°)
- -80 / +60
- Axis J3 — motion range (°)
- -127.7 / +150
- Axis J4 — motion range (°)
- ±360
- Axis J5 — motion range (°)
- ±135
- Axis J6 — motion range (°)
- ±360
- Axis J1 — max. speed (°/s)
- 115
- Axis J2 — max. speed (°/s)
- 105
- Axis J3 — max. speed (°/s)
- 113
- Axis J4 — max. speed (°/s)
- 140
- Axis J5 — max. speed (°/s)
- 173
- Axis J6 — max. speed (°/s)
- 260
- Wrist J4 — allowable moment (N·m)
- 687
- Wrist J5 — allowable moment (N·m)
- 687
- Wrist J6 — allowable moment (N·m)
- 353
- Wrist J4 — allowable inertia (kg·m²)
- 60
- Wrist J5 — allowable inertia (kg·m²)
- 60
- Wrist J6 — allowable inertia (kg·m²)
- 30
- Additional load on arm (kg)
- 45
- Operating temperature (°C)
- 0–45
- Max. humidity (%)
- 85
- Noise level (dB)
- 79.6
- Country of origin
- Japan
Price and availability in Poland
no data
Dealers in Poland
No confirmed distributor in Poland
Applications
We don't yet have documented applications for this model, and we don't list anything without a source.
Comparison
Robot comparison toolSimilar models
- on sale
- on sale
- on sale
- on sale
- on sale
- on sale
History
no data
Sources
Shop links may become affiliate links in future, details: How we make money · How we check