Data from manufacturer datasheets and product pages; median over the models of this category in the database.
NV06L
The NV06L is the long-arm variant of Nachi's NV series for GMAW/MIG-MAG and TIG arc welding. It keeps the 6 kg payload typical of the family but, with a 2006 mm reach – the L suffix denotes the long arm – covers a much larger working envelope than the standard version.
System components per manufacturer
Schematic drawing. You can click the assemblies for which this model has documented data (manufacturer data and published teardowns); greyed-out parts are not documented.
-
- Built-in cables in the arm for welding (wire feed, voltage detection)
Source: nachirobotics.com - Welding cables routed along the body through axis J1 to J3
Source: nachirobotics.com - Additional power cable ASSY for NV06L (option) (option) · L10485U00
Source: nachirobotics.com
- Built-in cables in the arm for welding (wire feed, voltage detection)
-
- FD11-FL0 robot controller (for NV06L / NB04L)
Source: nachirobotics.com
- FD11-FL0 robot controller (for NV06L / NB04L)
-
- Teach pendant with touch panel, jog dial and enable switch
Source: nachirobotics.com - Operation box with e-stop, motor on, start, stop and mode select
Source: nachirobotics.com
- Teach pendant with touch panel, jog dial and enable switch
-
- AF-4011 wire feeding unit
Source: nachirobotics.com
- AF-4011 wire feeding unit
-
- Air-cooled 350 A 45° curved torch
Source: nachirobotics.com - Water-cooled 500 A 45° curved torch
Source: nachirobotics.com - Shock sensor for manipulator, type V
Source: nachirobotics.com - Torch bracket dedicated to SSV · L10620B
Source: nachirobotics.com
- Air-cooled 350 A 45° curved torch
-
- IEC 61131-3 software PLC (optional) (option)
Source: nachirobotics.com
- IEC 61131-3 software PLC (optional) (option)
- 6kgPayload
- 273kgWeight
- 6DOFDegrees of freedom
- 2,006mmReach
Key facts
- Specificationspayload 6 kg · weight 273 kg · degrees of freedom 6 DOF
- Statuson sale
- Availability in Polandnot confirmed
Summary
- ManufacturerNACHI-FUJIKOSHI CORP. (Nachi Robotics)
- CategoryWelding robots
- Statuson sale
- Availability in PolandNo confirmed distributor in Poland
The NV06L is the long-arm variant of Nachi's NV series for GMAW/MIG-MAG and TIG arc welding. It keeps the 6 kg payload typical of the family but, with a 2006 mm reach – the L suffix denotes the long arm – covers a much larger working envelope than the standard version.
That reach is useful for welding large steel structures, chassis frames, tanks and sizeable sheet-metal parts whose seams run over long distances and across several planes. A repeatability of 0.08 mm ensures uniform, reproducible beads over the full joint length, giving stable series quality.
The robot welds both steel and aluminium, the IP65 rating allows dependable operation in smoky, dusty surroundings, and the FD11 controller synchronises all six axes with the arc parameters.
Specs
-
Weight273 kg−44% vs. the category median (485 kg, n=171)
-
Degrees of freedom6in line with the category median (6, n=224)
-
Payload6 kg−70% vs. the category median (20 kg, n=220)
-
Reach2,006 mmin line with the category median (2,050 mm, n=228)
- category medianA higher value doesn't always mean a better robot; it depends on the application.
Dimensions and weight
- Weight
- 273 kg
- Reach
- 2,006 mm
Motion and manipulation
- Degrees of freedom
- 6
- Payload
- 6 kg
Additional specs
- Series
- NV
- Welding type
- arc welding
- Welding processes
- MIG/MAG, TIG
- Applications (per manufacturer)
- arc welding
- Robot controller
- FD11
- Repeatability (± mm)
- 0.08
- Protection rating (IP)
- IP65
- Mounting
- floor, ceiling (inverted), wall
- Axis J1 — motion range (°)
- ±170
- Axis J2 — motion range (°)
- -155 / +100
- Axis J3 — motion range (°)
- -170 / +260
- Axis J4 — motion range (°)
- ±180
- Axis J5 — motion range (°)
- -50 / +230
- Axis J6 — motion range (°)
- ±360
- Axis J1 — max. speed (°/s)
- 195
- Axis J2 — max. speed (°/s)
- 200
- Axis J3 — max. speed (°/s)
- 200
- Axis J4 — max. speed (°/s)
- 420
- Axis J5 — max. speed (°/s)
- 420
- Axis J6 — max. speed (°/s)
- 620
- Wrist J4 — allowable moment (N·m)
- 11.8
- Wrist J5 — allowable moment (N·m)
- 9.8
- Wrist J6 — allowable moment (N·m)
- 5.9
- Wrist J5 — allowable inertia (kg·m²)
- 0.25
- Wrist J6 — allowable inertia (kg·m²)
- 0.06
- Additional load on arm (kg)
- 20
- Power supply capacity (kVA)
- 2.4
- Operating temperature (°C)
- 0–45
- Max. humidity (%)
- 80
- Country of origin
- Japan
Price and availability in Poland
no data
Dealers in Poland
No confirmed distributor in Poland
Applications
We don't yet have documented applications for this model, and we don't list anything without a source.
Comparison
Robot comparison toolSimilar models
- on sale
- on sale
- on sale
- on sale
- on sale
- on sale
History
no data
Sources
Shop links may become affiliate links in future, details: How we make money · How we check