Key findings
- 61 Kawasaki industrial arms from the maker's spec sheets.
- Payload from 2 to 1,500 kg, median 100 kg.
- Reach from 505.8 to 4,005 mm.
- Repeatability from ±0.02 to ±0.5 mm.
Key facts
- Samplen = 61
- Data as of14 October 2026
- Tables1 · charts: 1
- Number of sources58
In this article
Kawasaki Robotics is one of the oldest makers of industrial robots, and so far our catalogue has mainly a maker page for it. We collected the technical data of 61 industrial arms from the maker's spec sheets: number of axes, payload, reach, positioning repeatability, mass, mounting and degree of protection. Every value comes from a specific page of a document, and an independent check of 150 random values found no errors.
The range
Payload runs from 2 kg (YF002N-C) to 1,500 kg (MG15HL-B); the median for the 57 models with a stated payload is 100 kg. Reach runs from 505.8 mm (MC004N-Bxxx) to 4,005 mm (MG15HL-B), and repeatability from ±0.02 mm (RS003N-A) to ±0.5 mm (MT400N-D). The heaviest is the MG15HL-B — 6,550 kg without options.
Series and axes
The series with the most models are RS (10), BX (6), CP (5), BA (4). By number of axes: 4 axes — 7 models, 5 axes — 1 model, 6 axes — 51 models, 7 axes — 1 model. By payload class: 14 models up to 10 kg, 11 from 10 to 50 kg, 18 from 50 to 200 kg and 14 over 200 kg.
How to read the table
Repeatability is the maker's ISO 9283 figure (±), and mass is without optional equipment. Industrial robot prices are not public; a distributor or integrator sets them for a specific cell. More on the maker: Kawasaki Heavy Industries; on choosing a robot: “Cobot or Industrial Robot”.
Charts
Chart data table
| Category | Models |
|---|---|
| up to 10 kg | 14 |
| 10–50 kg | 11 |
| 50–200 kg | 18 |
| over 200 kg | 14 |
Data tables
Kawasaki industrial robots — spec-sheet data
Show table (61 rows)
| Model | Series | Axes | Payload (kg) | Reach (mm) | Repeatability (± mm) | Mass (kg) | Mounting | Protection (wrist/arm) |
|---|---|---|---|---|---|---|---|---|
| BA006L-B | BA | 6 | 6 | 2,036 | 0.08 | 160 | Floor or Ceiling mounting | — |
| BA006N-B | BA | 6 | 6 | 1,445 | 0.06 | 150 | Floor or Ceiling mounting | — |
| BA013L-A | BA | 6 | 13 | 2,093 | 0.06 | 280 | Floor or Ceiling or Wall mounting | — |
| BA013N-A | BA | 6 | 13 | 1,492 | 0.04 | 260 | Floor or Ceiling or Wall mounting | — |
| BT200L-B | BT | 6 | 200 | 3,151 | 0.08 | 1,100 | Shelf mounting | IP67/IP54 |
| BTP210L-A | BTP | 6 | 210 | 3,151 | 0.08 | 1,030 | Shelf mounting | IP67/IP54 |
| BU015N-C | BU | 6 | 15 | 1,550 | 0.04 | 160 | Floor mounting | — |
| BU015X-C | BU | 7 | 15 | 2,887.5 | 0.06 | 590 | Floor mounting | — |
| BX100N-B | BX | 6 | 100 | 2,200 | 0.06 | 740 | Floor mounting | IP67/IP54 |
| BX100S-B | BX | 6 | 100 | 1,634 | 0.06 | 720 | Floor mounting | IP67/IP54 |
| BX130X-C, BX130X-F | BX | 6 | 130 | 2,991 | 0.06 | 920 | Floor mounting | IP67/IP54 |
| BX200L-C, BX200L-F | BX | 6 | 200 | 2,597 | 0.06 | 890 | Floor mounting | IP67/IP54 |
| BX200X-C, BX200X-F | BX | 6 | 200 | 3,412 | 0.07 | 1,450 | Floor mounting | IP67/IP54 |
| BX300L-B, BX300L-E | BX | 6 | 300 | 2,812 | 0.07 | 1,460 | Floor mounting | IP67/IP54 |
| BXP110L-A | BXP | 6 | 110 | 2,597 | 0.06 | 870 | Floor mounting | IP67/IP54 |
| BXP110S-A | BXP | 6 | 110 | 1,634 | 0.06 | 700 | Floor mounting | IP67/IP54 |
| BXP135X-A | BXP | 6 | 135 | 2,991 | 0.06 | 880 | Floor mounting | IP67/IP54 |
| BXP210L-A | BXP | 6 | 210 | 2,597 | 0.06 | 870 | Floor mounting | IP67/IP54 |
| CL103N | CL | 6 | 3 | 590 | — | 17 | — | IP66 |
| CL105N | CL | 6 | 5 | 800 | — | 26 | — | IP66 |
| CL108N | CL | 6 | 8 | 1,300 | — | 48 | — | IP66 |
| CL110N | CL | 6 | 10 | 1,000 | — | 42 | — | IP66 |
| CP110L-A | CP | 4 | 110 | 2,505 | 0.05 | 820 | Floor mounting | IP54 |
| CP180L-A | CP | 4 | — | 3,255 | 0.5 | 1,600 | Floor mounting | — |
| CP300L-A | CP | 4 | — | 3,255 | 0.5 | 1,600 | Floor mounting | — |
| CP500L-A | CP | 4 | 500 | 3,255 | 0.5 | 1,650 | Floor mounting | — |
| CP700L-A | CP | 4 | 700 | 3,255 | 0.5 | 1,650 | Floor mounting | — |
| KF121U-D | KF | — | — | — | 0.2 | 140 | Floor mounting | — |
| MC004N-Bxxx | MC | 6 | 4 | 505.8 | 0.03 | 25 | Floor or Ceiling mounting | IP67/IP65 |
| MC004V-Bxxx | MC | 6 | 4 | 505.8 | 0.03 | 25 | Floor or Ceiling mounting | IP67/IP65 |
| MG15HL-B | MG | 6 | 1,500 | 4,005 | 0.1 | 6,550 | Floor mounting | — |
| MT400N-D | MT | 6 | — | 3,503 | 0.5 | 2,600 | Shelf mounting | — |
| MX350L-D | MX | 6 | 350 | 3,018 | 0.1 | 2,800 | Floor mounting | — |
| MX420L-D | MX | 6 | 420 | 2,778 | 0.1 | 2,800 | Floor mounting | — |
| MX500N-D | MX | 6 | 500 | 2,540 | 0.1 | 2,750 | Floor mounting | — |
| MX700N-D | MX | 6 | 700 | 2,540 | 0.1 | 2,860 | Floor mounting | — |
| MXP360L-A | MXP | 6 | 360 | 3,234 | 0.08 | 1,550 | Floor mounting | IP67/IP54 |
| MXP410X-A | MXP | 6 | 410 | 3,763 | 0.12 | 2,800 | Floor mounting | IP67/IP54 |
| MXP710L-A | MXP | 6 | 710 | 2,930 | 0.08 | 2,750 | Floor mounting | IP67/IP54 |
| RA005L-A | RA | 6 | 5 | 903 | 0.03 | 37 | Floor or Ceiling mounting | IP65 |
| RA020N-A | RA | 6 | 20 | 1,725 | 0.04 | 230 | Floor or Ceiling mounting | IP65 |
| RD080N-B | RD | 5 | 80 | 2,100 | 0.07 | 540 | Floor mounting | IP67/IP65 |
| RS003N-A | RS | 6 | 3 | 620 | 0.02 | 20 | Floor or Ceiling mounting | IP54 |
| RS007L-B | RS | 6 | 7 | 930 | 0.03 | 36 | Floor or Ceiling mounting | IP67/IP65 |
| RS007N-B | RS | 6 | 7 | 730 | 0.02 | 35 | Floor or Ceiling mounting | IP67/IP65 |
| RS013N-A | RS | 6 | 13 | 1,460 | 0.03 | 170 | Floor or Ceiling mounting | IP67/IP67 |
| RS015X-B | RS | 6 | 15 | 3,150 | 0.06 | 545 | Floor or Ceiling mounting | IP67/IP65 |
| RS020N-A | RS | 6 | 20 | 1,725 | 0.04 | 230 | Floor or Ceiling mounting | IP67/IP65 |
| RS025N-A | RS | 6 | 25 | 1,885 | 0.04 | 270 | Floor or Ceiling or Wall mounting | IP67 |
| RS030N-B | RS | 6 | 30 | 2,100 | 0.06 | 555 | Floor or Ceiling mounting | IP67/IP65 |
| RS050N-B | RS | 6 | 50 | 2,100 | 0.06 | 555 | Floor or Ceiling mounting | IP67/IP65 |
| RS080N-B | RS | 6 | 80 | 2,100 | 0.06 | 555 | Floor or Ceiling mounting | IP67/IP65 |
| YF002N-C | YF | 4 | 2 | — | 0.04 | 60 | Ceiling mounting | IP65 |
| YF003N-A | YF | 4 | 3 | — | 0.1 | 145 | Ceiling mounting | IP65 |
| ZT130U-E | ZT | 6 | 130 | — | 0.3 | 1,550 | Rack mounting | — |
| ZT165U-E | ZT | 6 | 165 | — | 0.3 | 1,550 | Rack mounting | — |
| ZT200S-E | ZT | 6 | 200 | — | 0.3 | 1,600 | Rack mounting | — |
| ZX130L-D | ZX | 6 | 130 | — | 0.3 | 1,400 | Floor mounting | — |
| ZX165U-D | ZX | 6 | 165 | — | 0.3 | 1,350 | Floor mounting | — |
| ZX200S-D | ZX | 6 | 200 | — | 0.3 | 1,400 | Floor mounting | — |
| ZX300S-D | ZX | 6 | 300 | — | 0.3 | 1,400 | Floor mounting | — |
Method
Values read by a program (no language models) from Kawasaki Robotics spec sheets (PDF), each with a verbatim quote, page and document checksum. Independent check: 150 random values from 58 documents, 0 errors.
Limits of the data
Spec-sheet data only, without prices or availability in Poland. Some sheets cover two versions (e.g. -C and -F) — the value then applies to both. Empty fields: the maker does not give the value in that document.
Frequently asked questions
What is the highest payload of a Kawasaki robot?
In this table 1,500 kg (MG15HL-B).
How much does a Kawasaki industrial robot cost?
The maker does not publish prices; a distributor or integrator prepares a quote for a specific cell.
Where does the data come from?
From Kawasaki Robotics spec sheets (PDF). Every value has its source and page recorded, and we checked 150 random values independently.
Sources
- kawasakirobotics.com/uploads/sites/2/2022/01/90151-0352DEB.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/90151-0368DEA.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/90151-0369DEA.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/BT200L-B-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/BU015N-C-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/BU015X-C-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/BX100N-B-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/BX100S-B-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/BX200L-C_F-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/BX200X-C_F-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/BX300L-B_E-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/BXP110L-A-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/BXP110S-A-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/BXP135X-A-E-1.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/BXP210L-A-E-1.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/CP180L-A-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/CP300L-A-E-1.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/MC004V-B-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/MG15HL-B-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/RD080N-B-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/RS007L-B-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/RS007N-B-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/RS013N-A-E-1.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/RS025N-A-E-2.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/RS030N-B-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/RS050N-B-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/RS080N-B-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_arc-weldin…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_arc-weldin…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_arc-weldin…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_extra-larg…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_extra-larg…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_extra-larg…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_extra-larg…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_extra-larg…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_large-payl…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_large-payl…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_large-payl…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_large-payl…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_large-payl…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_large-payl…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_painting-r…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_palletizin…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_palletizin…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_pick-and-p…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_pick-and-p…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_small-medi…
- kawasakirobotics.com/uploads/sites/2/2022/01/specifications_robots_small-medi…
- kawasakirobotics.com/uploads/sites/2/2022/04/BA013N-A-E-2.pdf
- kawasakirobotics.com/uploads/sites/2/2022/05/BX130X-C_F-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/05/ZT130UFE02001-E.pdf
- kawasakirobotics.com/uploads/sites/2/2022/10/BA013L-A-E-1.pdf
- kawasakirobotics.com/uploads/sites/2/2022/10/BTP210L-A-E.pdf
- kawasakirobotics.com/uploads/sites/2/2023/04/MXP360L-A-E.pdf
- kawasakirobotics.com/uploads/sites/2/2023/04/ef1bd71db39fa86b2f1acd2a289016ca…
- kawasakirobotics.com/uploads/sites/2/2024/01/90151-0417DEA.pdf
- kawasakirobotics.com/uploads/sites/2/2024/09/Kawasaki_Robotics_CL_Series_Data…
- kawasakirobotics.com/uploads/sites/2/2026/01/CP110L-A-E.pdf
How to cite
When citing this analysis, give the title, the page address and the date of the last update. Suggested form:
Robolupa editorial team, "Kawasaki Industrial Robots: 61 Models in One Table", Robolupa (robolupa.com), published 14 October 2026, updated 14 October 2026, https://robolupa.com/analysis/kawasaki-industrial-robots/.
Download the data (CSV)
Tables as CSV: UTF-8, comma separated, unformatted values. When you reuse them, please credit Robolupa, the address of this page and the date of the last update. Data: CC BY 4.0, cite: Robolupa.
About the authors
A chief engineer by profession (technical head of a ship's machinery plant, licensed). Sets the site's editorial rules and is responsible for them; he does not read every page before publication.
Texts are prepared by the editorial team using AI tools. We compare data with primary sources on a sample basis, not page by page. Our rules are described here: How we check · About us