Data from manufacturer datasheets and product pages; median over the models of this category in the database.
AR2010
With a reach of up to 2010 mm, the Motoman AR2010 covers a noticeably larger working area than the mid-range AR-series models while keeping the six-axis design intended for arc welding in GMAW/MIG-MAG and TIG.
System components per manufacturer
Schematic drawing. You can click the assemblies for which this model has documented data (manufacturer data and published teardowns); greyed-out parts are not documented.
-
- Hollow arm routing welding cables and wire feed to the wrist
Source: yaskawa.eu.com
- Hollow arm routing welding cables and wire feed to the wrist
-
- YRC1000 controller with arc welding functions
Source: yaskawa.eu.com
- YRC1000 controller with arc welding functions
-
- Prepared wire feeder mounting space at axis 3
Source: yaskawa.eu.com
- Prepared wire feeder mounting space at axis 3
- 12kgPayload
- 260kgWeight
- 6DOFDegrees of freedom
- 2,010mmReach
Key facts
- Specificationspayload 12 kg · weight 260 kg · degrees of freedom 6 DOF
- Statuson sale
- Availability in Polandnot confirmed
Summary
- ManufacturerYaskawa Electric Corporation (Motoman)
- CategoryWelding robots
- Statuson sale
- Availability in PolandNo confirmed distributor in Poland
With a reach of up to 2010 mm, the Motoman AR2010 covers a noticeably larger working area than the mid-range AR-series models while keeping the six-axis design intended for arc welding in GMAW/MIG-MAG and TIG. This reach makes it possible to handle large steel and aluminium structures, long frames and broad multi-station fixtures without repositioning the part.
The 12 kg payload lets it guide the torch together with cabling, wire feed and seam-tracking sensors. Repeatability of 0.03 mm keeps bead quality consistent even along the long paths typical of extended parts. The main axes meet IP54, while the wrist is protected to IP67, safeguarding the arm end closest to the arc zone.
Everything is run by the YRC1000, which provides smooth path interpolation and stable welding parameters. The AR2010 is the natural choice where spanning large dimensions matters, such as load-bearing structures, vessels or larger welded frames.
Specs
-
Weight260 kg−46% vs. the category median (485 kg, n=171)
-
Degrees of freedom6in line with the category median (6, n=224)
-
Payload12 kg−40% vs. the category median (20 kg, n=220)
-
Reach2,010 mmin line with the category median (2,050 mm, n=228)
- category medianA higher value doesn't always mean a better robot; it depends on the application.
Dimensions and weight
- Weight
- 260 kg
- Reach
- 2,010 mm
Motion and manipulation
- Degrees of freedom
- 6
- Payload
- 12 kg
Additional specs
- Series
- AR
- Welding type
- arc welding
- Applications (per manufacturer)
- arc welding
- Robot controller
- YRC1000
- Repeatability (± mm)
- 0.03
- Protection rating (IP)
- IP54
- Protection rating (wrist)
- IP67
- Mounting
- floor, ceiling (inverted), wall, angled
- Axis J1 — motion range (°)
- ±180
- Axis J2 — motion range (°)
- -105 / +155
- Axis J3 — motion range (°)
- -86 / +160
- Axis J4 — motion range (°)
- ±200
- Axis J5 — motion range (°)
- ±150
- Axis J6 — motion range (°)
- ±455
- Axis J1 — max. speed (°/s)
- 210
- Axis J2 — max. speed (°/s)
- 210
- Axis J3 — max. speed (°/s)
- 220
- Axis J4 — max. speed (°/s)
- 435
- Axis J5 — max. speed (°/s)
- 435
- Axis J6 — max. speed (°/s)
- 700
- Wrist J4 — allowable moment (N·m)
- 22
- Wrist J5 — allowable moment (N·m)
- 22
- Wrist J6 — allowable moment (N·m)
- 9.8
- Wrist J4 — allowable inertia (kg·m²)
- 0.65
- Wrist J5 — allowable inertia (kg·m²)
- 0.65
- Wrist J6 — allowable inertia (kg·m²)
- 0.17
- Operating temperature (°C)
- 0–45
- Max. humidity (%)
- 80
- Country of origin
- Japan
Price and availability in Poland
no data
Dealers in Poland
No confirmed distributor in Poland
Applications
We don't yet have documented applications for this model, and we don't list anything without a source.
Comparison
Robot comparison toolSimilar models
- on sale
- on sale
- on sale
- on sale
- on sale
- on sale
History
no data
Sources
Shop links may become affiliate links in future, details: How we make money · How we check